unit IsDebbuged;

interface
uses
Windows;

function PD_PEB_BeingDebuggedFlag(): Boolean;
function FD_PEB_NtGlobalFlags(): Boolean;
function FD_Heap_HeapFlags(): Boolean;
function FD_Heap_ForceFlags(): Boolean;
function FD_CheckRemoteDebuggerPresent(): Boolean;         //能搞定OD
function FD_NtQueryInfoProc_DbgPort(): Boolean;
function FD_NtQueryInfoProc_DbgObjHandle(): Boolean;
function FD_NtQueryInfoProc_DbgFlags(): Boolean;          //能搞定OD
function FD_SeDebugPrivilege(csrssPid: THandle): Boolean;
function FD_Find_Debugger_Window(): Boolean;
function FD_Exception_Closehandle(): Boolean;             //能搞定OD
function FD_Exception_Int3(): Boolean;
function FD_OutputDebugString(): boolean;
function FD_Check_StartupInfo(): Boolean;
function FD_INT_2d(): Boolean;                           //能搞定OD
function FS_OD_Int3_Pushfd(): Boolean;
function FS_SI_Exception_Int1(): Boolean;
function FB_HWBP_Exception(): Boolean;
//综合查看是否被调试
function IsDebugged:boolean;
{ 测试
procedure TForm1.FormCreate(Sender: TObject);
begin
if IsDebugged then
application.Terminate;
end;
}
implementation

function IsDebugged:boolean;
begin
result := false;
      if FB_HWBP_Exception then
Result := true;
      if FS_SI_Exception_Int1 then
Result := true;
      if FD_Find_Debugger_Window then
Result := true;
      if PD_PEB_BeingDebuggedFlag then
Result := true;
      if FD_PEB_NtGlobalFlags then
Result := true;
      if FD_Heap_HeapFlags then
Result := true;
      if FD_CheckRemoteDebuggerPresent then
Result := true;
      if FD_NtQueryInfoProc_DbgPort then
Result := true;
      if FD_NtQueryInfoProc_DbgObjHandle then
Result := true;
      if FD_NtQueryInfoProc_DbgFlags then
Result := true;
      if FD_SeDebugPrivilege(916) then
Result := true;
      if FD_Exception_Closehandle then
Result := true;
      if FD_Exception_Int3 then
Result := true;
      if FD_OutputDebugString then
Result := true;
      if FD_Check_StartupInfo then
Result := true;
      if FD_INT_2d then
Result := true;
      if FS_OD_Int3_Pushfd then
Result := true;
end;

//使用查看PEB结构中标志位beingDegug来检测是否被调试
function PD_PEB_BeingDebuggedFlag(): Boolean;
begin
asm
      mov @result, 0
      mov eax, fs:[30h] //EAX = TEB.ProcessEnvironmentBlock
      add eax, 2
      mov eax, [eax]
      and eax, $000000ff //AL = PEB.BeingDebugged
      test eax, eax
      jne @IsDebug
      jmp @exit
@IsDebug:
      mov @result, 1
@exit:
end;
end;

//查看PEB结构中的NtGlobalFlags标志位来检测是否被调试
function FD_PEB_NtGlobalFlags(): Boolean;
begin
asm
      mov @result, 0
      mov eax, fs:[30h]
      mov eax, [eax+68h]
      and eax, $70      //NtGlobalFlags
      test eax, eax
      jne @IsDebug
      jmp @exit
@IsDebug:
      mov @result, 1
@exit:
end;
end;

//在PEB结构中，使用HeapFlags来
//检测调试器也不是非常可靠，但却很常用。
//这个域由一组标志组成，正常情况下，该值应为2
function FD_Heap_HeapFlags(): Boolean;
begin
asm
      mov @result, 0
      mov eax, fs:[30h]
      mov eax, [eax+18h] //PEB.ProcessHeap
      mov eax, [eax+0ch] //PEB.ProcessHeap.Flags
      cmp eax, 2
      jne @IsDebug
      jmp @exit
@IsDebug:
      mov @result, 1
@exit:
end;
end;

//检测PEB结构中的标志位ForceFlags，它也由一
//组标志组成，正常情况下，该值应为0
function FD_Heap_ForceFlags(): Boolean;
begin
asm
      mov @result, 0
      mov eax, fs:[30h]
      mov eax, [eax+18h]       mov eax, [eax+10h]
      test eax, eax
      jne @IsDebug
      jmp @exit
@IsDebug:
      mov @result, 1
@exit:
end;
end;

//使用API：CheckRemoteDebuggerPresent
function FD_CheckRemoteDebuggerPresent(): Boolean;
var
Func_Addr: Pointer;
hModule: Cardinal;
pDebugBool: PBool;
begin
result := false;
hModule := GetModuleHandle('kernel32.dll');
if hModule = INVALID_HANDLE_VALUE then exit;
Func_addr := GetProcAddress(hModule, 'CheckRemoteDebuggerPresent');
if (Func_addr <> nil) then begin
      asm
        lea eax, pDebugBool
        push eax
        push $ffffffff
        call Func_addr
        cmp dword ptr[pDebugBool], 0
        jne @IsDebug
        jmp @exit
      @IsDebug:
        mov @result, 1
      @exit:
      end;
end;
end;

//使用ntdll_NtQueryInformationProcess()来查询
//ProcessDebugPort可以用来检测反调试
function FD_NtQueryInfoProc_DbgPort(): Boolean;
var
Func_Addr: Pointer;
hModule: Cardinal;
ReturnLength: PULONG;
dwDebugPort: PDWORD;
begin
result := false;
hModule := GetModuleHandle('ntdll.dll');
if hModule = INVALID_HANDLE_VALUE then exit;
Func_addr := GetProcAddress(hModule, 'ZwQueryInformationProcess');
if (Func_addr <> nil) then begin
      asm
        lea eax, ReturnLength
        push eax                    //ReturnLength
        push 4                      //ProcessInformationLength
        lea eax, dwDebugPort
        push eax                    //ProcessInformation
        push 7                      //ProcessInformationClass
        push $FFFFFFFF              //ProcessHandle
        call Func_addr              //NtQueryInformationProcess
        cmp [dwDebugPort], 0
        jne @IsDebug
        jmp @exit
      @IsDebug:
        mov @result, 1
      @exit:
      end;
end;
end;

//查询winXp自动创建的"debug object"的句柄
function FD_NtQueryInfoProc_DbgObjHandle(): Boolean;
var
Func_Addr: Pointer;
hModule: Cardinal;
ReturnLength: PULONG;
dwDebugPort: PDWORD;
begin
result := false;
hModule := GetModuleHandle('ntdll.dll');
if hModule = INVALID_HANDLE_VALUE then exit;
Func_addr := GetProcAddress(hModule, 'ZwQueryInformationProcess');
if (Func_addr <> nil) then begin
      asm
        lea eax, ReturnLength
        push eax
        push 4
        lea eax, dwDebugPort
        push eax
        push $1E
        push $FFFFFFFF
        call Func_addr
        mov eax, [dwDebugPort]
        test eax, eax
        jnz @IsDebug
        jmp @exit
      @IsDebug:
        mov @result, 1
      @exit:
      end;
end;
end;

//查询winXp自动创建的"debug object"，
//未公开的ProcessDebugFlags类，当调试器存在时，它会返回false
function FD_NtQueryInfoProc_DbgFlags(): Boolean;
var
Func_Addr: Pointer;
hModule: Cardinal;
ReturnLength: PULONG;
dwDebugPort: PDWORD;
begin
result := false;
hModule := GetModuleHandle('ntdll.dll');
if hModule = INVALID_HANDLE_VALUE then exit;
Func_addr := GetProcAddress(hModule, 'ZwQueryInformationProcess');
if (Func_addr <> nil) then begin
      asm
        lea eax, ReturnLength
        push eax
        push 4
        lea eax, dwDebugPort
        push eax
        push $1F
        push $FFFFFFFF
        call Func_addr
        mov eax, [dwDebugPort]
        test eax, eax
        jz @IsDebug
        jmp @exit
      @IsDebug:
        mov @result, 1
      @exit:
      end;
end;
end;

//是否获得SeDebugPrivilege
//是否可以使用openprocess操作CSRSS.EXE
function FD_SeDebugPrivilege(csrssPid: THandle): Boolean;
var
hTmp: Cardinal;
begin
result := False;
hTmp := OpenProcess(PROCESS_ALL_ACCESS,false,csrssPid);
if hTmp <> 0 then begin
      CloseHandle (hTmp);
      result := true;
end;
end;

//查找已知的调试器的窗口来检测是否被调试
function FD_Find_Debugger_Window(): Boolean;
var
whWnd: DWORD;
begin
result := True;
//ollydbg v1.1
whWnd := FindWindow('icu_dbg', nil);
if whWnd <> 0 then Exit;
//ollyice pe--diy
whWnd := FindWindow('pe--diy', nil);
if whWnd <> 0 then Exit;
//ollydbg ?-
whWnd := FindWindow('ollydbg', nil);
if whWnd <> 0 then Exit;
//windbg
whWnd := FindWindow('WinDbgFrameClass', nil);
if whWnd <> 0 then Exit;
//dede3.50
whWnd := FindWindow('TDeDeMainForm', nil);
if whWnd <> 0 then Exit;
//IDA5.20
whWnd := FindWindow('TIdaWindow', nil);
if whWnd <> 0 then Exit;
result := False;
end;

//给CloseHandle()函数一个无效句柄作为输入参数
//是否触发一个EXCEPTION_INVALID_HANDLE (0xc0000008)的异常
function FD_Exception_Closehandle(): Boolean;
begin
try
      CloseHandle($00001234);
      result := False;
except
      Result := True;
end;
end;

//int3 检测
function FD_Exception_Int3(): Boolean;
begin
      asm
        mov @result, 0
        push offset @exception_handler //set exception handler
        push dword ptr fs:[0h]
        mov dword ptr fs:[0h],esp
        xor eax,eax       //reset EAX invoke int3
        int 3h
        pop dword ptr fs:[0h] //restore exception handler
        add esp,4
        test eax,eax // check the flag
        je @IsDebug
        jmp @exit
      @exception_handler:
        mov eax,dword ptr [esp+$c]//EAX = ContextRecord
        mov dword ptr [eax+$b0],$ffffffff//set flag (ContextRecord.EAX)
        inc dword ptr [eax+$b8]//set ContextRecord.EIP
        xor eax,eax
        ret
      @IsDebug:
        xor eax,eax
        inc eax
        mov esp,ebp
        pop ebp
        ret
      @exit:
        xor eax,eax
        mov esp,ebp
        pop ebp
        ret
      end;
end;

//使用OutputDebugString函数来检测
function FD_OutputDebugString(): boolean;
var
tmpD: DWORD;
begin
OutputDebugString('');
tmpD := GetLastError;
if(tmpD = 0) then
      result := true
else
      Result := false;
end;

//检测STARTUPINFO结构中的值是否为0
function FD_Check_StartupInfo(): Boolean;
var
si: STARTUPINFO;
begin
ZeroMemory(@si, sizeof(si));
si.cb := sizeof(si);
GetStartupInfo(si);
if (si.dwX <> 0) and (si.dwY <> 0)
      and (si.dwXCountChars <> 0)
      and (si.dwYCountChars <> 0)
      and (si.dwFillAttribute <> 0)
      and (si.dwXSize <> 0)
      and (si.dwYSize <> 0) then begin
      result := true
end else
      result := false;
end;

//使用int 2dh中断的异常检测
function FD_INT_2d(): Boolean;
begin
try
      asm
        int 2dh
        inc eax //any opcode of singlebyte.
                //;or u can put some junkcode,
                //"0xc8"..."0xc2"..."0xe8"..."0xe9"
        mov @result, 1
      end;
except
      Result := false;
end;
end;

//最近比较牛的反调试
function FS_OD_Int3_Pushfd(): Boolean;
begin
asm
      push offset @e_handler //set exception handler
      push dword ptr fs:[0h]
      mov dword ptr fs:[0h],esp
      xor eax,eax //reset EAX invoke int3
      int 3h
      pushfd
      nop
      nop
      nop
      nop
      pop dword ptr fs:[0h] //restore exception handler
      add esp,4

      test eax,eax //check the flag
      je @IsDebug
      jmp @Exit

@e_handler:
      push offset @e_handler1 //set exception handler
      push dword ptr fs:[0h]
      mov dword ptr fs:[0h],esp
      xor eax,eax //reset EAX invoke int3
      int 3h
      nop
      pop dword ptr fs:[0h] //restore exception handler
      add esp,4      //EAX = ContextRecord
      mov ebx,eax //dr0=>ebx
      mov eax,dword ptr [esp+$c]     //set ContextRecord.EIP
      inc dword ptr [eax+$b8]
      mov dword ptr [eax+$b0],ebx //dr0=>eax
      xor eax,eax
      ret

@e_handler1:        //EAX = ContextRecord
      mov eax,dword ptr [esp+$c]     //set ContextRecord.EIP
      inc dword ptr [eax+$b8]
      mov ebx,dword ptr[eax+$04]
      mov dword ptr [eax+$b0],ebx //dr0=>eax
      xor eax,eax
      ret

@IsDebug:
      mov @result, 1
      mov esp,ebp
      pop ebp
      ret
@Exit:
      mov esp,ebp
      pop ebp
      ret
end;
end;

//使用int1的异常检测来反调试
function FS_SI_Exception_Int1(): Boolean;
begin
asm
      mov @result, 0
      push offset @eh_int1 //set exception handler
      push dword ptr fs:[0h]
      mov dword ptr fs:[0h],esp
      xor eax,eax //reset flag(EAX) invoke int3
      int 1h
      pop dword ptr fs:[0h] //restore exception handler
      add esp,4
      test eax, eax // check the flag
      je @IsDebug
      jmp @Exit

@eh_int1:
      mov eax,[esp+$4]
      mov ebx,dword ptr [eax]
      mov eax,dword ptr [esp+$c] //EAX = ContextRecord
      mov dword ptr [eax+$b0],1 //set flag (ContextRecord.EAX)
      inc dword ptr [eax+$b8] //set ContextRecord.EIP
      inc dword ptr [eax+$b8] //set ContextRecord.EIP
      xor eax, eax
      ret
@IsDebug:
      mov @result, 1
      mov esp,ebp
      pop ebp
      ret
@Exit:
      xor eax, eax
      mov esp,ebp
      pop ebp
      ret
end;
end;

//在异常处理过程中检测硬件断点
function FB_HWBP_Exception(): Boolean;
begin
asm
      push offset @exeception_handler //set exception handler
      push dword ptr fs:[0h]
      mov dword ptr fs:[0h],esp
      xor eax,eax //reset EAX invoke int3
      int 1h
      pop dword ptr fs:[0h] //restore exception handler
      add esp,4 //test if EAX was updated (breakpoint identified)
      test eax,eax
      jnz @IsDebug
      jmp @Exit

@exeception_handler:       //EAX = CONTEXT record
      mov eax,dword ptr [esp+$c] //check if Debug Registers Context.Dr0-Dr3 is not zero
      cmp dword ptr [eax+$04],0
      jne @hardware_bp_found
      cmp dword ptr [eax+$08],0
      jne @hardware_bp_found
      cmp dword ptr [eax+$0c],0
      jne @hardware_bp_found
      cmp dword ptr [eax+$10],0
      jne @hardware_bp_found
      jmp @exception_ret
@hardware_bp_found: //set Context.EAX to signal breakpoint found
      mov dword ptr [eax+$b0],$FFFFFFFF
@exception_ret:       //set Context.EIP upon return
      inc dword ptr [eax+$b8] //set ContextRecord.EIP
      inc dword ptr [eax+$b8] //set ContextRecord.EIP
      xor eax,eax
      ret
@IsDebug:
      mov @result, 1
      mov esp,ebp
      pop ebp
      ret
@Exit:
      xor eax, eax
      mov esp,ebp
      pop ebp
      ret
end;
end;

end.